SpraySmart Acuspread 1000 5L (NDG)
WETP5
Active Ingredient:
Polyalkylene Oxide Derivative (100 g/L Active Silicone Emulsion).
Purpose:(Registered Uses)
Spray Adjuvant it improves the Performance of Selected Agricultural and Horticultural Sprays by:
- Increasing Spray Spreading.
- Improving Coverage.
- Enhancing Uptake.
- Reducing Spray Droplet Surface Tension.
- Soil Wetting Agent.
Suitable For:
- Turf.
- Lawns.
- Cotula Greens.
Benefits Include:
- Improved Water Penetration.
- Better Soil Moisture Distribution.
- Improved Drainage.
- Assists in Controlling Dry Patch.
Hazard Information:
- Human Health.
- May be harmful if Swallowed, Inhaled or Absorbed through the Skin.
- May cause Eye Irritation.
- May cause Organ Damage following prolonged, repeated exposure at high doses.
Environmental:
- Toxic to Aquatic Organisms with long-lasting effects.
- Avoid Contamination of Waterways.
Note: Although the label states "Not Classified" under HSNO Hazard Classification, it still includes Precautionary Statements for Health and Environmental Protection.
Personal Protective Equipment: (PPE).
When Handling or Mixing Wear:
- Impervious Gloves.
- Overalls.
- Boots.
- Goggles or Face Shield.
Avoid:
- Skin Contact.
- Eye Contact.
- Inhalation of Spray Mist.
- Wash Hands and Face thoroughly after use.
Mixing Instructions:
- Add Acuspread when the Spray Tank is approximately 7/8 full.
- This helps minimise Foaming.
Application Rates:
Spray Adjuvant:
Spray Type Broadacre & Aerial:
Aerial:
- Rate (<100 L/ha) use 100–150 mL/ha.
Broadacre:
- Rate (100–500 L/ha) use 50–100 mL/100 L spray.
Broadacre:
- Rate (>500 L/ha) use 25–50 mL/100 L spray.
Spray Type Handgun:
- Rate 50–100 mL/100 L.
Spray Type Knapsack:
- Rate 5–10 mL per 15 L.
Soil Wetting Agent:
Initial Treatment:
Application:
- Rate 10 L/ha (1 mL/m²).
Maintenance :
- Rate 5 L/ha (0.5 mL/m²).
Recommendations:
- Apply with Calibrated Boom or Knapsack Sprayer.
- Avoid Hot, Sunny Conditions.
- Light Rain or Irrigation within 3 days Improves Performance.
- DO NOT Tank Mix with other Products when using as a Soil Wetting Agent.
Water Conditioning:
The label includes Guidance for adjusting Spray Water pH according to Water Hardness.
Typical Rates Range From:
- 40–50 mL/100 L (Soft Water) Up to 220+ mL/100 L (very Hard Water).
- This assists in Reducing Spray Water pH where required.
Storage:
- Store in the Original Tightly Closed Container.
- Keep in a Cool, Dry Location.
- Store away from Foodstuffs.
Storage Over 1,000 Litres Requires:
- Secondary Containment.
- Signage.
- Emergency Response Plan.
Equipment:
- Use well-maintained, Accurately Calibrated Spray Equipment.
Disposal:
- Triple Rinse Containers.
- Add rinsate to the Spray Tank.
- Recycle Containers where Possible.
- Otherwise Crush and Bury in an Approved Landfill.
- Dispose of unused Product according to the Label.
Spill Response:
- Exclude Unnecessary People.
- Prevent Contamination of Waterways.
- Absorb with Inert Material.
- Dispose of Waste Safely.
First Aid:
If Swallowed:
- DO NOT induce Vomiting.
- Contact the National Poisons Centre (0800 764 766) or a Doctor Immediately.
Skin or Eye Contact:
- Remove Contaminated Clothing.
- Flush affected Area thoroughly with running Water.
Transport:
- Do not Transport on Passenger Service Vehicles.
Caution:
Must be used strictly according to label directions.
Available in a 5L, 10, 20L.
Acuspread Label 10L
Please contact us for a Safety Data Sheet on this product









